Pairing the Palm Bluetooth Card with a Nokia
6210 + connectivity pack DTL-1P,
Replace the standard battery at the back of your phone by the Bluetooth Connectivity Battery. Switch
on the phone. An icon showing a dot with waves radiating from it ((
•
)) should be displayed at the upper
left corner of the screen. This means that the Nokia 6210 has the correct version of software.
The software revision should be V05.02 or higher. To check the firmware on a Nokia phone, type in
the following command: *#0000#.
Please check with your local Nokia phone dealer to get a free upgrade.
On the Nokia 6210, there is no user interface to set up Bluetooth. The Bluetooth passkey required for
the pairing is hard-coded. It is printed in 2 different places:
- When you open your connectivity pack, you will find the battery protected in a plastic
sleeve. There should be a printed label on the plastic sleeve with the serial number and the Bluetooth
passkey
-
If you don’t have this plastic sleeve, follow the steps below
o
Remove the connectivity battery
Summary of Contents for Bluetooth Card
Page 6: ......
