10
indicating that the detector has memorized the 50
￠
silver coin.
When sweeping the other five samples, the detector does not
respond.(see Fig.13 , take the 50
￠
silver coin as an example)
f) If you want to search other material metals, press the “MODE”
button again. The MEMORY cursor still lights up, and still shows
the same as Fig.11.Then repeat the above operation.
g) To quit the MEMORY mode, press the MODE button, making
the detector return to the state of Fig.11. Then press the MODE
button again, to quit the MEMORY mode, and enter the next
operation mode.
6. JEWELRY mode test
Press the MODE button again, the JEWELRY cursor is lighted.
The first target cursor on the left removed, showing that the iron
is eliminate. It only responds to other metals.(See Fig.14,take
1
￠
zinc coin as an example)
7. PINPOINT mode test
a) Press the “P-P” button lightly, and the PP cursor lights and
flashes.The detector completes the balance, and the PP cursor
stops flashing.
Summary of Contents for 970P
Page 1: ...User Manual ...
Page 2: ......
