Page
21
of
48
5.4 Fitting the Base Scale on the iCELLis 500+ Control System
The Base scale is packed in the crate for accessories and documentation. Unpack the Base scale and
follow the procedure below to install and connect it to the iCELLis 500+ control system.
Install the Base scale on the iCELLis 500+ control system as per Figure 10a-b. Connect the base scale
at the back of the iCELLis 500+ control system to the ‘scale’ connector (Figure 10c). Place the Base tray
on the scale (Figure 10d). Level the scale by turning the blue feet of the base scale. When the scale is
leveled the bubble shall be in the center of the bubble indicator of the scale (Figure 10e).
Figure 10: Installation of Base weight scale –
a) Fitting Base scale in dedicated foot slots,
b) Base scale in place, c) Connection of communication port,
d) Base tray placed on Base scale, e) Base scale level bubble.
