4
Measurement
16
4.4 Using Manual Ranging Function
By default your meter has auto-ranging ability and automatically selects the
range in which your readings appear.
Alternatively, to override auto-ranging you can manually select a specific range
by pressing
s
successively for each measurement range. The five ranges are:
Micro 600 COND
Micro 600 TDS
Conductivity Range
0 - 20.00 µS/cm
0 - 10.00 ppm
0 - 200.0 µS/cm
0 - 100.0 ppm
0 - 2000 µS/cm
0 - 1000 ppm
0 - 20.00 mS/cm
0 - 10.00 ppt
0 - 200.0 mS/cm
0 - 100 ppt
TDS Range (using 0.5 TDS factor)
NOTE:
If the value of the solution you are measuring is higher than the range
selected
[
Or
]
(over range) will appear. Press
s
to select a measurable range.
The meter resets to Auto-ranging function once it is turned off. You will
have reset the manual ranging function each time you turn the meter off.
Manual ranging:
0 - 20.00 mS/cm
Manual ranging:
0 - 2000 uS/cm
Manual ranging:
0 - 200.0 mS/cm
Manual ranging:
0 - 20.00 uS/cm
Manual ranging:
0 - 200.0 uS/cm
Auto ranging:
