PALI spa
via Palmarina 115
33048 San Giovanni al Natisone
Udine Italy
tel. +39.432.756074
fax +39.432.757623
e-mail [email protected]
www.paliitaly.com
Assembly
instructions
ref: stationary side
Version 2004
A
B
D
E
F
G
H
4x
4x
I
4x
J
4x
4x
4x
Z
2x
(left + right)
4x
4x
1x
C
4x
1 mattress base (K)
1 dropside (L)
1 stationary side (M)
2 ends (N)
2 rails (P)
1 drawer front (R)
1 drawer center partition (S)
2 drawer ends (T)
2 drawer bottoms (U)
1 drawer back (V)
Crib and drawer parts list
Tools needed
for assembly
INSTRUCTION
LEAFLET
Important, keep
for future reference.
Read carefully
IMPORTANT: In order to properly assemble the cot, carry out the operations in
the order specified. Failure to assemble the crib in the manner recommended
could make the crib hazardous.
Carefully remove and lay out all parts. Familiarize yourself with all diagrams to
facilitate the assembly of your crib. Check parts enclosed in hardware bag with
the HARDWARE PARTS LIST to be sure all are included and quantities are correct.
This crib has been designed for your child's
comfort and your convenience. Quality
material and workmanship have gone into
this crib which will provide a sound and
comfortable bed for your baby if properly
assembled and maintained. For the security of
your child and your own peace of mind be
sure to follow the assembly instructions
exactly. A periodic check should be made of
all bolts and screws, which should be
tightened if needed. Moisture and heat are
harmful to the finish; for this reason use
extreme caution when a vaporizer is in use.
The vapor steam should always be aimed
away from the crib as well as away from any
other wood furniture. Some types of soft
plastic toys could damage the finish when
placed against it.
(not available
on Renee crib)
