25
ILM
plus
Series
Gate chattering or sticking in columns
Inspection Steps
Step 1.
Check rails are square and
parallel in
X,Y, and Z axis.
Welded to truck correctly.
(see Installation Manual page
19).
Step 2.
Check Rails for items listed below
•
Rails are not damaged, crushed, or pulled open.
•
Inside of rails are clean and free of any grease or non-approved lubricants.
•
Inside of rails are smooth and free of any rust, pitting, paint overspray, or weld
spatter full length.
•
Runners are straight, plastic pads in place, clean, not sticky, not burnt from welding
during install.
•
Bottoms of rails, if cut , free of slag, and burrs, and ground off smooth with 30°
chamfer.
