Palazzetti WILMA, Use And Function

Page: 21 / 68

ENGLISH
2 PRELIMINARY OPERATIONS
2.1 LOADING THE PELLETS
The ¿ rst operation to be performed before starting the appliance is to ¿ ll the hopper with fuel (pellets).
The pellets are loaded into in the hopper using a scoop.
Do not empty the sack directly into the hopper so as to avoid loading sawdust or other foreign bodies that may
affect proper stove operation and avoid spilling pellets outside of the hopper.
2.2 POWER SUPPLY
Plug the stove into the mains power supply. If the connections are correct the stove will emit a series of
intermittent beeps, the display will come on.
For long periods of disuse, we recommend disconnecting the stove completely from its power supply.
2.3 INITIAL SETTINGS
Current date and time need to be set before using the stove.
2.3.1
7LPHDQG'DWHVHWWLQJ
To set the date:
a) Use the buttons to go to the setup menu and press ;
b) Use the button to select the password “7” and then press to con ¿ rm;
c) Use the button to scroll to and select submenu
[3]
and press to con ¿ rm;
d) The hour value will À ash; set the value using the buttons and press ;
e) The minutes value will À ash; set the value using the buttons and press ;
f) The day value will À ash; set the value using the buttons and press ;
g) The month value will À ash; set the value using the buttons and press ;
h) The year value will À ash; set the value using the buttons and press ;
i) The current weekday value will À ash (Monday = 1... Sunday = 7); set the value using the buttons;
j) Press to con ¿ rm the settings.
2.3.2
6HWWLQJWKHGLVSOD\PRGH
The data shown on the display when this is in standby mode can be set.
a) Use the arrow buttons to go to the setup menu and then press ;
b) Use the button to select the password “7” and then press to con ¿ rm;
c) Use the button to scroll to and select submenu
[12]
and press to con ¿ rm;
d) Set one of the following values using the and buttons:
“OFF”
• The display remains on the last operation set by the user;
“1”
• All operating parameters are displayed cyclically;
“2”
• The room or water probe temperature is shown, based on the type of con ¿ guration
“3”
• The current time is shown
“4”
• The operating autonomy in hours before having to re ¿ ll the hopper is shown , If the function
“ ¿ lling” has been activated.
e) Press
to con
¿ rm the settings.
21