Palazzetti ECOMONOBLOCCO MX, Installation And Maintenance Manual

Page: 32 / 88

32 004778411 - 18/09/2020
6.3.2 mX 78 and mX 86 models
1) Position the lateral refractory and the elbow
being sure to insert them in the appropriate
slots ( A) (Fig. 19).
A
Fig. 19
2) Block the refractory with the bracket (b)
being sure to insert the slots in the relevant
projections and secure it with the appropriate
screws ( c) (Fig. 20).
B
C
Fig. 20
3) Proceed in the same way on the opposite side
(in the
mX R and mX l models there are only
the elbow and the upper bracket (
b - Fig. 20)
due to the presence of the side glass).
4) Place the refractory backrest (D) behind the
bracket ( E) and make sure that the post com-
bustion outlet holes are centred with the slot
on the panel ( Fig. 21).
D
E
Fig. 21
5) Block the refractory with the bracket (F) fixing
it with the appropriate screws ( G) (Fig. 22).
F
G
Fig. 22