5
Operation and settings
3577-en-us_V1.1_08/17
21
5.9
Displaying measurements
To display a stored measurement, proceed as follows:
1.
Select the
Analysis
menu
2.
Select the desired measurement from the list
If applicable, deactivate an existing selection with
deselect
3.
Display the measurement with
open
4.
With
OK,
confirm the dialog window to select the measurements
The measurement is displayed.
5.10
Comparing measurements
You can compare a maximum of 5 measurements to each other.
To compare measurements, proceed as follows:
1.
Select the
Analysis
menu
2.
Select the desired measurements from the list
If applicable, deactivate an existing selection with
deselect
3.
Display the measurements with
open
4.
With
OK,
confirm the dialog window to select the measurements
The measurements are displayed.
5.
Compare the measurements with
compare
5.11
Adding pictures
Pictures can be taken with the camera on the operating element, for in-
stance to document the surroundings of the measuring site. The pictures can
be added to the measurement.
Note
This function is only available while a measurement is in progress.
To add pictures, proceed as follows:
1.
Touch the camera feature
The camera opens.
2.
Take a picture
Multiple pictures can be taken.
3.
Close the camera feature by touching X
The dialog window for adding pictures opens.
Attention
: One you close the dialog window, the pictures are
no
longer
available.
4.
Touch
Add
to add the desired image
Add a comment on the picture and save with
Send
Multiple pictures can be added to the measurement.
Touch
remove
to remove individual pictures.
After adding the desired pictures, close the dialog window.
5.12
Entering comments
You can enter comments for a measurement, such as “A window was
opened”.