Pakedge W6 Series, User Manual

Page: 30 / 62

W6x User Manual
30
5. Configure the Security Mode to match those on the SSID the client bridge is associated with.
6. Click Accept to apply the changes.
7. Finish the configuration of the W6x in Client Bridge Mode by assigning it a unique IP address
if it is not connected to a DHCP server.
8. You should be able to verify performance from the client device by sending a ping request to
the IP address of the Wireless Access Point or by accessing the GUI through your Web
Browser at the same address.
For more detailed setup information on setting up the W6x in Client-Bridge mode see below.
Wireless
With the W6x operating in Client Bridge mode, the main menu shows two options
under the Wireless section:

Network Settings

Advanced