Pakedge Device & Software WK-2 User Manual Download Page 3

WK-2x User Manual

 

3

 

 

 

Using wireless equipment on board an airplane.

 

 

Using wireless equipment in any environment where the risk of interference to other devices or services is 
perceived or identified as harmful.

 

If

 

you

 

are

 

uncertain

 

of

 

the

 

applicable

 

policy

 

for

 

the

 

use

 

of

 

wireless

 

equipment

 

in

 

a

 

specific

 

organization

 

or

 

environment

 

(such

 

as

 

airports),

 

you

 

are

 

encouraged

 

to

 

ask

 

for

 

authorization

 

to

 

use

 

the

 

device

 

prior

 

to

 

turning

 

on

 

the

 

equipment.

  

The

 

manufacturer

 

is

 

not

 

responsible

 

for

 

any

 

radio

 

or

 

television

 

interference

 

caused

 

by

 

unauthorized

 

modification

 

of

 

the

 

devices

 

included

 

with

 

this

 

product,

 

or

 

the

 

substitution

 

or

 

attachment

 

of

 

connecting

 

cables

 

and

 

equipment

 

other

 

than

 

specified

 

by

 

the

 

manufacturer.

  

Correction

 

of

 

interference

 

caused

 

by

 

such

 

unauthorized

 

modification,

 

substitution,

 

or

 

attachment

 

is

 

the

 

responsibility

 

of

 

the

 

user.

  

The

 

manufacturer

 

and

 

its

 

authorized

 

resellers

 

or

 

distributors

 

are

 

not

 

liable

 

for

 

any

 

damage

 

or

 

violation

 

of

 

government

 

regulations

 

that

 

may

 

arise

 

from

 

failing

 

to

 

comply

 

with

 

these

 

guidelines.

 

 

Caution:

 

Exposure

 

to

 

Radio

 

Frequency

 

Radiation.

 

To

 

comply

 

with

 

the

 

FCC

 

RF

 

exposure

 

compliance

 

requirements,

 

the

 

separation

 

distance

 

between

 

the

 

antenna

 

and

 

any

 

person’s

 

body

 

(including

 

hands,

 

wrists,

 

feet

 

and

 

ankles)

 

must

 

be

 

at

 

least

 

20

 

cm

 

(8

 

inches).

 

WARNING:

 

TO

 

PREVENT

 

FIRE

 

OR

 

SHOCK

 

HAZARD,

 

DO

 

NOT

 

EXPOSE

 

THIS

 

PRODUCT

 

TO

 

RAIN

 

OR

 

MOISTURE.

  

THE

 

UNIT

 

MUST

 

NOT

 

BE

 

EXPOSED

 

TO

 

DRIPPING

 

OR

 

SPLASHING

 

WATER.

  

CAUTION:

 

DO

 

NOT

 

OPEN

 

THE

 

UNIT.

  

DO

 

NOT

 

PERFORM

 

ANY

 

SERVICING

 

OTHER

 

THAN

 

THAT

 

CONTAINED

 

IN

 

THE

 

INSTALLATION

 

AND

 

TROUBLESHOOTING

 

INSTRUCTIONS.

  

REFER

 

ALL

 

SERVICING

 

TO

 

QUALIFIED

 

SERVICE

 

PERSONNEL.

  

CAUTION:

 

THIS

 

DEVICE

 

MUST

 

BE

 

INSTALLED

 

AND

 

USED

 

IN

 

STRICT

 

ACCORDANCE

 

WITH

 

THE

 

MANUFACTURER’S

 

INSTRUCTIONS

 

AS

 

DESCRIBED

 

IN

 

THE

 

USER

 

DOCUMENTATION

 

THAT

 

COMES

 

WITH

 

THE

 

PRODUCT.

  

WARNING:

 

POSTPONE

 

INSTALLATION

 

UNTIL

 

THERE

 

IS

 

NO

 

RISK

 

OF

 

THUNDERSTORM

 

OR

 

LIGHTNING

 

ACTIVITY

 

IN

 

THE

 

AREA.

 

SAFETY

 

PRECAUTIONS:

 

When

 

using

 

this

 

device,

 

always

 

follow

 

basic

 

safety

 

precautions,

 

to

 

reduce

 

the

 

risk

 

of

 

fire,

 

electric

 

shock,

 

and

 

injury

 

to

 

persons,

 

including

 

the

 

following

:

 

 

Read all of the instructions (listed here and/or in the user manual) before you operate this 
equipment.

 

 

Comply with all warning and caution statements in the instructions.

 

 

Retain the instructions for future reference.

 

 

Observe all warning and caution symbols that are affixed to this equipment.

 

 

Comply with all instructions that accompany this equipment.

 

 

Upon completion of any service or repairs to this product, ask the service technician to perform 
safety checks to determine that the product is in safe operating condition.

 

 

Installation of this product must be in accordance with national wiring codes and conform to local 
regulations.

 

 

Avoid using this product during an electrical storm.  There may be a risk of electric shock from 
lightning.  For added protection for this product during a lightning storm, or when it is left 
unattended and unused for long periods of time, unplug the power supply, and disconnect the CAT5e 
to the WK-2x at the PoE.  This will prevent damage to the product due to lightning and power surges. 

 

Summary of Contents for WK-2








































Reviews: