WAP-W3N User Manual
18
•
Daylight
Savings
:
Click
the
box
to
enable
Daylight
savings
and
then
enter
the
appropriate
dates
for
Daylight
Savings
in
your
geographical
region.
•
Click
on
the
Apply
button
once
you
have
modified
the
settings.
3.2.
Network
Under
the
Network
tab
there
are
three
links;
LAN
Settings,
DHCP
Server,
and
SNMP.
These
are
used
to
manage
some
of
the
network
functions
of
the
W3N
such
as
the
device
IP
address
and
Spanning
Tree
Protocol.
3.2.1. LAN Settings
In
order
to
configure
the
IP
address
of
the
device
click
on
the
LAN
Settings
link
under
the
Network
tab.
This
page
allows
you
to
configure
the
device
with
a
static
IP
address
or
as
a
DHCP
client
•
IP
Address
:
Enter
an
IP
address
for
this
device
•
IP
Subnet
Mask
:
Enter
the
subnet
mask
for
this
IP
address.
•
Default
Gateway
:
Enter
the
IP
address
of
the
default
gateway.
•
802.1d
Spanning
Tree
:
If
you
wish
to
enable
Spanning
Tree
Protocol
to
improve
performance
in
complex
networks,
select
Enabled
from
the
drop
down
menu.
STP
is
disabled
by
default.
•
DHCP
Server
:
Place
a
check
in
this
box
if
you
would
like
the
WAP
‐
W3
to
function
as
a
DHCP
Server.
•
Lease
Time:
This
is
the
amount
of
time
that
a
client
may
have
an
IP
address
before
it
is
required
to
renew
the
lease.
When
the
lease
expires,
the
client
must
make
a
new
lease
or
it
becomes
available
for
use
by
another
client.
