1
Unpacking Information
Thank you for purchasing the Pakedge Device & Software
SE-8P
gigabit switch.
Before installation, please verify that your package contains the following items.
1. One 8-Port Gigabit Ethernet Switch with 8-port PoE+
2. One AC power cord
3. Rack-mount brackets
and screws
(included, optional use)
4. User Manual
Introduction
General Description
The SE-8P provides 8*10/100/1000Mbps Gigabit ports with 8-port PoE+, making
it an excellent choice for a fast, cost effective and reliable networking
infrastructure. The store-and-forward architecture filters errors and forwards
packets in a non-blocking environment. Flow control ensures the accuracy of the
data transmitted. The PoE+ on the SE-8P supplies power for connected devices
that need it. Over current protection and circuit shorting protection are also
supported.
The switch was designed for easy installation and maintenance. It supports the
Nway auto-negotiation protocol that detects networking speed (10/100/1000
Mbps) and duplex modes (Full/Half) automatically. Auto-MDI/MDI-X function
alleviates the need for crossover cables. Also, rich diagnostic LEDs are provided
for real-time connection status information.
Key Features
Complies with 10BASE-T specifications of the IEEE802.3 standard
Complies with 100BASE-TX specifications of the IEEE802.3u standard
Complies with 1000BASE-T specifications of the IEEE802.3ab standard
Complies with IEEE 802.3af/at PoE standard
Supports 31.5W maximum per PoE port
Supports over current protection and circuit shorting protection
8* 10/100/1000Mbps RJ-45 Nway ports
Supports NWay protocol for speed (10/100/1000Mbps) and duplex mode
(Half/Full) auto-detection
Supports MDI/MDI-X auto crossover
Supports full and half duplex operation on all ports
Wire-speed packet filtering and forwarding rate
Store-and-forward architecture filters fragment & CRC error packets
Supports 8K MAC address entries in whole system
