Packing Instructions
The pieces pack together in only one way, so packing it should be quite simple. It is designed to be intuitive
and, as you might have imagined, it’s the reverse of the assembly instructions above.
Rinse with fresh water and let dry, if possible.
Flip cockpit pad over to reveal clamps. Unclip the
seat and put aside. Unlatch 5 clamps in cockpit
separating the two halves of the boat. Flip cockpit
pad back over clamps to add a protective barrier
between the clamps and the piece it will fit over.
Set foot pedals all the way down toward the
bulkhead. If you have stowed the bag behind your
seat, remove and open it.
Stand each half up like a tower, one with the
bow at the top and the other with the stern at
the top. On the bow tower, open the hatch cover
and unlatch 3 clamps at the top. Replace nylon
sleeve on bow, securing velcro strap around the
handle to keep in place, and place bow piece in
bag on the foam locator.
On the stern tower, open the hatch cover and unlatch 3 clamps
at the top. Place stern piece on bow piece with a quarter turn so
the model logo is facing forward.
1.
2.
3.
On the stern tower, unlatch 4 clamps and replace hatch cover.
Place piece in bag over the bow and stern pieces.
4.
IMPORTANT:
The clamps are self locking. To unlatch, push the thumb lever back
slightly before pulling up on the black latch handle.
Summary of Contents for Bluefin 14
Page 1: ...Owner s Manual...
