1.7 Use
1.6 Start-up
If the activation was successful, you can start the VEHICLE Finder 4G 2.0.
When connected to the power supply, the FINDER will switch on.
NOTE!
After you have successfully installed the VEHICLE Finder 4G 2.0 in your ve-
hicle, it is advisable to move the vehicle for some time. For example, drive
the car briefly to go shopping. This allows the device to log into the correct
network faster and establish a first connection.
Red cable
Black cable
-
+
-
+
Battery
9-75 V
NOTE!
By connecting to the power supply, the FINDER turns on immediately and the
LED lights give a signal. If the device is not connected to the vehicle battery
but to another location (e.g., fuse box), this may cause the ignition on/off
function to be not accurately recognized.
WARNING!
The poles must not be swapped under any circumstances.
As soon as your device has been successfully activated, started up and has sent
and logged data for the first time, you can place it wherever you choose and use
your phone, tablet or PC to start tracking it! You will be able to do this in our App or
enter the following link to the desktop version:
