PAJ GPS PET Finder 4G, Manual

Page: 6 / 28

1.5 Switching on/off
Once your device has been activated successfully and fully charged, you are ready to
turn your device on and start using it!
Switch on:
In order to turn the device on, hold the on/off button down for 5 seconds until the
big green LEDs light up. When switching on, all three large LEDs (red, green, blue)
light up briefly.
(If the FINDER is connected to the power source, it will switch on
automatically)
NOTE!
The PET Finder 4G is designed for outdoor use. In order to get the best reception
results, we recommend that you use it outside buildings. If you do not see a
position displayed in your FINDER portal, we recommend that you move the
device outdoors if possible (e.g. during a walk or a short drive). This allows the
FINDER to connect to the best mobile network. A network connection is essential
for position data to be transmitted from the FINDER to the FINDER portal and
displayed.