User Manual
MX11500
Ver. 01
Operation
20
Press the Thickness button on the OP Panel to detect the thickness of the paper.
3
①
The MX11500 has a light sensor to detect paper thickness & prevent double feeding.
When you press the Thickness button, a sheet of paper is fed and automatically
detects the paper thickness.
②
When the double detection function is activated, the Thickness lamp is turned on
Pressing the button again will turn off the lamp and double detection will be disabled.
Press Start / Stop button for operation
4
If an emergency occurs during operation, press the emergency switch
on the front of the unit to stop the machine.
①
Operation will continue to run until finishing all of the paper loaded on the LCT.
(when Batch Count / Auto Start function is activated, it depends on the amount of count
setup )
②
Press Start / Stop while operation, the machine stops.
Adjust the fold position of UCA / LCA as your desire fold type.
2
Operation
Load the paper on the LCT.
1
