PairGain CRA-C, User Manual

Page: 39 / 86

Configure and View Status
Megabit Modem CRA-C User Manual 31
Configure as a Bridge
Configure Bridge parameters at the Bridge/Router Menu. Bridge configuration
options are maintained and restored through the system's local service port and
are kept in NVRAM to be used in subsequent initializations.
1 Type
1
1
at the Bridge/Router Menu to display the Bridge
Configuration Menu.
2 Type
1
1
, press the spacebar to toggle to Bridge, then press
ENTER ENTER
. At the prompt,
Save current setting (Y/N)
, type
Y to display this screen. Ensure the mode setting is Bridge.
07/02/97 PAIRGAIN TECHNOLOGIES 08:54:11
ATU-C ADSL MEGABIT MODEM TERMINAL 01.01
BRIDGE CONFIGURATION MENU
-------------------------------------------------------------
SETTINGS 1. BRIDGE/ROUTER MODE BRIDGE
2. LOCAL IP ADDR 192.168.240.10
3. LOCAL SUBNET MASK 255.255.255.0
4. BOOT ROUTER IP ADDR 0.0.0.0
5. DEFAULT ROUTER IP ADDR 192.168.240.1
6. SPANNING TREE DISABLE
7. BOOT SERVER IP ADDR 0.0.0.0
8. BOOT MODE LOCAL
9. IMAGE FILE NAME
A. IMAGE LOAD MODE LOCAL
B. PACKET ENCAPSULATION HDLC
--------------------------------------------------------------
(C)onfirm (U)ndo (R)eturn (M)ain
ENTER CHOICE-->
3 Do the following for each Bridge Configuration option you want
to change:
•
Type the number or letter of the option you want
to configure.
•
Select, using the spacebar, or type in the appropriate
information for each option as indicated in Table 10
then press
ENTER
ENTER .