manualshive.com logo in svg

PairGain 150-2238-01, Manual, Page: 28 / 42

Share
Download
PairGain 150-2238-01 Manual Download Page 28

System Configuration

350-819-200-01, Revision 01

22

November 12, 1999

 HLU-819 List 1

Nx64K Port (Data port on the UTU-814)

Interface Type

Selection is only available for NTU. The serial data interface at the 
Nx64K port conforms to V.35, V.36, RS-530, RS-449, or 
X.21standards. 

Data Rate/# of TSs

 (a)

Specify the Nx64K transmit data rate as the number of kbps or the 
number of Nx64K time slots.

64 to 1536 (kbps)

or

Enter the data rate from 64 to 1536 kbps (for example, 64, 256, 
768). Factory default setting is 1536 kbps (24 time slots).

0 to 24 (time slots) Enter the number of Nx64K time slots up to 24 (for example, 1,12, 

24). Factory default setting is 24 (1536 kbps).

Beginning TS

 (a)

Enter the number of the beginning time slot for the transmitted 
serial data. Options are time slots 1 to 24 in STRUCT (framed) 
application mode and time slot 1 in UNSTRUCT (unframed) mode. 
The factory default setting is time slot 1.

Transmit Clock

Specify the transmit data (SD) clock as External (EXT), Internal 
Rising Edge (INT_RISING), or Internal Falling Edge 
(INT_FALLING).

CTS/DSR/RLSD

Specify one of three methods the LTU and NTU uses to generate 
the CTS, DSR, and RLSD control signals for the Nx64K (V.35, V.36, 
RS-530, RS-449, or X.21) serial data port. The Nx64K port is 
hardware configured as DCE. Set each of these parameters to 
match the requirements of the application. The choices are:

STD (standard)

The output control signal follows the ITU standards.

ON (force ON)

Control signals are always ON.

OFF (force OFF)

Control signals are always OFF.

LL/RL

Select whether the LTU and NTU respond to or ignore the Local 
Loopback (LL) and Remote Loopback (RL) control signals. 

DIS

LTU and NTU ignore LL and RL control signals.

ENA

LTU and NTU respond to LL and RL control signals. Status of local 
and remote loopbacks appears on the Test display.

(a) The number of times slots selected for the DSX-1 port determines the number of time slots 

remaining for the Nx64K port, and may determine the beginning time slot for the Nx64K 
port in NTU only. Overlapping time slots are not allowed.

Table 5.

Settings in Config LTU and NTU Interface Menus (Cont.)

Field

Description

Summary of Contents for 150-2238-01











































Reviews:

No comments