Always make sure that the motor base is on a stable surface and free from dust and debris or
other liquids.
1.
Unscrew the paint container from the spray gun.
2.
After the material has been properly thinned and strained, fill the container to the top of the neck.
DO NOT OVERFILL
above the start of the threaded neck.
3. Push the pick-up tube firmly into the base of the gun body. Carefully screw the cup back onto the
spray gun.
An airtight seal is essential for the correct operation of this spray gun. Before operating the
unit, please ensure that the paint container is securely fixed to the spray gun body and the
gasket is in place.
By pointing the suction tube in the proper direction, you will not have to refill the container
as often.
A)
If you are going to be spraying in an upward direction, the angled end of the suction tube
should be pointing toward the rear of the gun.
B)
If you are going to be spraying in a downward direction, the angled end of the suction tube
should be pointing toward the front of the gun.
ALIGNING THE SUCTION TUBE
FILLING THE PAINT CONTAINER
A.
B.
11
12
