11
CIT
IRIC
AC
ID
CIT
IRIC
AC
ID
10
60~80℃
WHAT TO DO AFTER USING
REMOVING WASTED WATER
CLEANING THE PRODUCT
CHECKING THE SILICON RING
STORING THE PRODUCT
WASHING THE PRODUCT
①
WHEN DRAINAGE BASIN IS MORE THAN
HALF-FILLED, DRAIN THE WASTED WATER.
②
OPEN DRAINAGE PLUG AND REMOVE WASTED WATER.
※
CAUTION
avoid wasted water from leaking into main body when disposing the water by
placing the product upside down.
③
DRY THE PRODUCT AND CLOSE DRAINAGE PLUG.
CAUTION
NEVER WASH THE PRODUCT WITH FLOWING WATER OR
SOAK THE PRODUCT INTO WATER.
•
PERIODIC CLEANING
CLEAN THE PRODUCT ROUTINELY WITH CITRIC ACID.
- fill water bottle with water (250ml) and citric acid 5g. shake the
bottle 2-3 times and drain all of the water.
•
GENTLY WIPE THE BODY WITH SOFT TOWEL.
- keep the product dry after cleaning.
•
CHECK THE TRANSPARENT SILICON RING IS ON THE BOTTLE. ADAPTER
•
KEEP COVER CLOSED WHEN NOT USING THE PRODUCT.
•
BE AWARE THE POWER IS ON WITH PUSH POWER BUTTON UNINTENDEDLY.
•
DO NOT STORE THE PRODUCT AROUND HEATER OR WHERE TEMPERATURE GOES BELOW 0
℃
•
PLEASE BE CAREFUL AS THE SILICON RING MAY BE DIVIDED FROM
THE ADAPTER WHEN YOU SEPERATE THE BOTTLE.
•
CLEAN HYDROGEN GENERATOR WITH SOFT FABRIC OR SPONGE.
- when dirt is not removed, combine the product with water bottle filled with a
half of water and shake a few times. After cleaning the inside of the product,
Immediately drain the water.
- in case of silicon ring dividing, put silicon ring on the adapter and push that
slightly.
•
REMOVING CALCIUM COMPOUNDS
WHEN USED MANY TIMES, CALIUM COMPOUNDS(SODIUM, MINERAL) MIGHT
CUMULATES ON HYDROGEN GENERATOR.
- fill water bottle with water(250ml and citric acid 5g. combine the water bottle
with the product and leave it for 1 hour.
•
CLEANING WHEN SMELLS
WHEN USED MANY TIMES, HYDROGEN GENERATOR MIGHT SMELL.
FILL HOT WATER(60~80℃) INTO HYDROGEN GENERATOR AND WAIT 3~5
MINUTES. REMOVE THE WATER.
- smell does not affect to hydrogen generating and taste of water.