2
4.
Route the GREEN/WHITE wire to the A/C compressor clutch. Use the yellow Posi-
tap to connect this GREEN/WHITE wire to the 12 Volt power wire that activates the
A/C compressor clutch.
5.
Use the other two self tapping hex head screws to mount the circuit breaker as close
as possible to whichever power source (battery or large terminal on the starter
solenoid) you are using for the fan relay.
6.
Route the red wire labeled <TO BATTERY/CONSTANT HOT> from the relay to the
threaded silver lug of the circuit breaker. Cut to length and install using one of the
yellow ring terminals. Take the remaining length of red wire you cut and connect the
threaded copper lug on the circuit breaker to the battery source.
7.
Route the red wire labeled <TO ELECTRIC FAN> from the relay to the power wire
on the electric fan. Take the other wire from the fan and connect it to ground. If you
are using two smaller fans splice this wire to both of the power wires coming from
the fans.
Summary of Contents for 30115
Page 3: ...3...
