indicator, the UV sterilization/strain decomposition indicator, and the child lock indicator.
The dot is an alarm indicator, and the alarm light is lit in the event of a stall or abnormal
high temperature.
Grinding and drying work button:
In the state of no open child lock, after a long press for 3 seconds to open, a "drip"
sound is emitted, and the device enters the grinding and drying working mode.
1、A "Dribble" prompt sound is emitted, and the machine enters working mode. The
working LED is on.
2、The first step is drying, the motor drives the metal blade to rotate slowly (35 seconds
positive -" 50 seconds stop -" 35 seconds reverse) metal blade 2.5r/min cycle, heating
control heating plate temperature to 110 degrees, exhaust fan began to work. The air
outlet temperature is constant at 65 degrees and the humidity is lower than 60 to enter
the next process;
3、The second part is crushed, and the motor drives the metal blade to rotate rapidly
(45 seconds forward rotation -" 35 seconds stop -" 45 seconds reverse) metal blade
about 3.5r/min cycle cycle, heating control heating plate temperature 110 degrees,
exhaust fan has been working, control the temperature in the barrel, air outlet
temperature is constant at 70 degrees and humidity is less than 10% to enter the next
process;
4、The third step is cooling, heating off, fan on, UV lamp cycle start and stop (30min per
hour, stop 30min), while the motor drives the metal blade to rotate slowly (60 seconds
positive -" 10 seconds stop -" 60 seconds reverse) metal blade 3.5r/min cycle, the air
