4
0
1.
Uncover and clean the motorcycle.
2.
Check the
batter
voltage. When the voltage is 12.3V
or
below,
you will need to charge before use.
3.
Drain any rust-inhibiting oil from the fuel tank. Fill the fuel tank with fresh
fuel
.
4.
Perform all pre-ride inspection checks. Test ride the motorcycle in a safe area
away
from traffic.
Clean the motorcycle off dust and mud with dry cloth regularly. Dry the motorcycle when it is wet.
Apply a little rust-inhibiting oil on zinc-coated and chrome-coated parts. Wax the painted parts to keep
them
looking new
. Lubricate
all
moving Part
s
.
Inflate both
ti
res
to their recommended pressures
.
Che ck all bolts, nuts and screws to prevent a safety hazard resulting from loosening.
Check both front and rear brakes. Immediately adjust and replace if they are excessively worn or don't
function properly.
Perform the pre-ride inspection at each scheduled maintenance period.
Symbols in the table stand for as follows:
1.INSPECT, CLEAN,
ADJUST, LUBRICATE OR REPLACE
IF NECESSARY.
C
:CLEAN
R
:REPLACE
A
: ADJUST
L
:LUBRICATE
I
:INSPECT
*
Should be serviced by your authorized
PAGSTA
dealer
.
** I
n the interest of safe
ty, we recommend these items be serviced only by your authorized service dealer.
REMOVAL FROM STORAGE
MAINTENANCE
MAINTENANCE SCHEDULE