The "Save As" will show the message programmed for the key. Depending on the settings
requested when you ordered your equipment you might see different messages.
For example, if you requested that key on the Onyx Call Button to have a message installed,
then it will display that message on the Wear & Go Watch. If you did not request any
messages installed then the "Save As" message will be blank.
At this point you can modify or choose to keep that message for that key. Use button
2
to
scroll left, button
3
to scroll right and use buttons
1
to go up or
4
to go down in order to
enter or edit the desired message.
To save the message for that key, use the button
2
and button
3
arrow keys to select "Save"
and press the button
4
key to confirm. A display screen will show "OK" and will revert back to
the pairing screen. Repeat previous steps to program additional keys of the same call button
or different call button keys. To exit the pairing screen, press the
1
button.
17
