Matrix Plus
PAGING SYSTEM
Installing the Transmitter
The first consideration in the placement of the transmitter is convenience. It should be
readily accessible in a central location within the paging area. Pay close attention to
nearby obstructions such as walls, pipes, ducts, mirrored glass, or other similar barriers
that may weaken or misdirect transmitted signals. Certain materials and construction,
especially metal, have the potential to partially or completely block the paging signal.
The next consideration involves safety. Ensure the unit is securely mounted and away
from liquids, extreme heat and possible physical damage. Also remember that the
transmitting unit requires a 110V AC power outlet. Ideally the transmitter should
be centrally located within the area where paging is to occur. See the special function
section of this guide entitled ‘Range Test’ for more information. Also consult your Sales
Consultant for additional information. Once the Transmitter has been installed, plug in
the power adapter.
Once powered the transmitter will display
“Enter Message #00-99’’
indicating it is ready
to send a page. We recommend some type of surge suppressor on the power supply for
protection. Power surges are not covered under system warranty.
2
Summary of Contents for Matrix Plus
Page 1: ...Matrix Plus System USER GUIDE...
Page 10: ...8...
