www.pagergenius.com
User manual
9
T9050/T9050W/P2000
SETTING THE TIME ON THE PAGER
Pager Genius pagers keep military time, and is an
option if you would like your pagers to display time.
How to set-up the time display on a pager:
Step 1:
Make sure the pager has the
C
(Clock) setting
option selected. .
Step 2:
Press the
Mode button
several times until
you get the correct hour, and then press the
Stop
button
to move the time to the minutes area. You
use the
Stop button
to toggle between the hours
and minutes.
SETTING THE ALERT TIME ON THE PAGERS
You can have the pagers alerted 15, 30, 45, and 60
seconds. Usually, 15 seconds is a reasonable amount of
time to alert the person to the page.
If the person does not respond to the first page, you can
keep paging that person repeatedly.
You can change the paging time by turning a pager over
and locating the time button. Press the time button and
select the time you would like the pager to go off when
paged. Set the time that is right for your environment.
CLEANING PAGER GENIUS EQUIPMENT
We recommend using isopropyl alcohol based cleaners to clean the pagers
and transmitter. This is the only approved cleaner that we recommend at this
time. It is recommended the paging system be wiped down once a week.
The pager digital
screen will display
C
(Clock)
Time Button
