PageFlip Cicada User Guide
9. FREQUENTLY ASKED QUESTIONS
An LED is lit next to the current mode setting of the pedal. Simply press
a different mode button to change the setting. The LED will turn off once
the PageFlip Cicada enters sleep mode after 30 minutes of inactivity (on
version V5). Sleep mode is entered after 10 minutes of inactivity on ver-
sions V1 to V4.
Why is the pedal not turning pages?
Confirm that the device “Dual Pedal” is paired to your computer and that
the correct pedal mode is selected. Some software may require arrow
keys while others may require PageUp/PageDown or other keystrokes.
Try several modes until you find one that works. Note that if you use unre-
alBook on the iPad, you must go to the app’s settings (tap the gear icon)
and set Network->BT Keyboard Connected to ON. NextSong switches can
be left OFF. The app will then respond to the Up/Down Arrow keys.
Why is the pedal not turning pages on the unrealbook app?
Confirm that the device "Dual Pedal" is paired to your computer and that
the Up/Down arrow mode is set on the pedal. This is indicated by a blink-
ing light next to the middle (third) mode button. Then, make sure you go
to the app’s settings (tap the gear icon) and set Network->BT Keyboard
Connected to ON. The app will then respond to the Up/Down Arrow keys.
What are the different operating conditions signified by the LED?
A solid LED means that the pedal is plugged into a power source. If the
RESET button is pressed, the pedal enters Bluetooth discovery mode and
all the LEDs flash in sequence. The LED flashes once per second after
the pedal is turned on and is attempting to establish a Bluetooth connec-
tion with a paired device. The LED flashes once every four seconds to
signal that the pedal is already paired. Repeated bursts of three quick
flashes signal a low-battery condition.
PageFlip, Inc.
24
www.pageflip.com
Summary of Contents for Cicada
Page 1: ...PageFlip Cicada Wireless Bluetooth Pedal User Guide...
Page 2: ......