2.7
Although the charger is reverse polarity protected, extreme care
should always be taken not to short circuit the battery itself.
Rechargeable batteries can deliver power at a very high rate, and
short circuiting even a partially charged battery could result in a fire
or personal injury.
2.8
Do not disassemble the charger. There are no user-serviceable
parts inside. Incorrect reassembly may result in a safety hazard.
2.9
If any part of the charger has been damaged, if it has been exposed
to moisture, rain or liquid, or if it does not operate normally, you
should seek advice from your nearest Authorised PAG Service Centre,
as detailed in section 5, Servicing.
2.1
When used correctly, the Micro Charger is a safe method of charging
Li-Ion batteries within the range specified in Section 3.2. However,
incorrect treatment of the charger and its accessories could present a
safety hazard. Please read these important safety and operating
instructions before using the PAG Micro Charger.
WARNING:
2.2
IMPORTANT:
The Power Supply Unit is designed for use on 100-240V,
50-60Hz AC supplies. AC supply connection to the charger should be
made using only the Power Supply Unit and plug supplied with this
charger.
NOTE: The Power Supply Unit supplied with the previous
Micro Charger Model 9710 is not suitable for Models 9713 &
9713V.
2.3
The Micro Charger is designed for 5-20V DC input only. Connection to
DC supplies should be made using only the power leads supplied with
the charger. The USB charger connection must be 2A or more.
2.4
Protect any power leads from being walked on or pinched.
2.5
Disconnect the charger from the AC supply during lightning storms
or when unused for long periods of time.
2.6
WARNING: INDOOR USE ONLY.
To reduce the risk of fire or electric
shock, do not expose the charger to rain or moisture.
2. Safety Information
5
ELECTRIC SHOCK: This symbol appears where the informa-
tion relates to the risk of electric shock.
WARNING: This symbol appears where the information
relates to an issue of personal safety.
