14
6. Run-Time, Capacity & Data
Press x3 without
holding to select
4th menu item:
Software Version
Press & hold to see
version number.
This indicates 1...
...this indicates 9.
Therefore it reads
Version 1.9.
4. Software Version
6.6
PAGlink Battery Reader
The PAGlink Battery Reader is an accessory that can be used to display
data stored in the battery’s microprocessor via an easy to understand
numeric display. When connected to the battery contacts it will
provide information that is beneficial for managing your batteries:
Reader Menu:
1. State of charge as a percentage
2. Available capacity in ampere-hours
3. Cell temperature in degrees Celsius
4. Number of charge/discharge cycles
5. Voltage
6. Full capacity in ampere-hours
7. Date of birth (manufacture)
8. Software version
9. Serial number
Press x4 without
holding to select
5th menu item:
Reset Function
Press & hold to perform
reset & do not release
until all lights turn-off.
5. Reset Function
After selecting to view the software version number, the battery will enter
Sleep Mode
automatically.
Sleep Mode
reduces battery self-discharge and can
be used when you are going to store or ship your batteries. To exit Sleep
Mode or ‘wake’ the battery, press the display button twice, link 2 batteries or
connect the battery to a charger.
Press x2 without holding
to select 3rd menu item:
Charge/Discharge Cycles
Press & hold to see
number of cycles.
This indicates 3...
...this indicates 6.
Therefore it reads
36 cycles.
3. Number of Cycles (Charge/Discharge)
