10
6. Battery Display
6.1
Run-Time & Capacity
1. When connected to equipment that is turned on, two presses of the
battery’s display button will show a predicted run-time against the
given load, expressed in hours and minutes.
2. A single button press of the display, whether the battery is off or
on-load, shows a percentage figure of available capacity, to a
resolution of 1%.
3. When the battery is fully charged the display will indicate 100%.
4. When battery is fully-discharged the display will indicate as above.
The accuracy of the display is maintained by tracking battery performance
and adjusting calibration values to compensate for the aging of the cells.
1
2
3
4
6.2
Data Display
The battery display can reveal data stored in the battery’s internal
microprocessor using a series of button presses:
Press x3 in 1 second
intervals & hold to
enter data mode
Release to see 1st menu
item: ‘Pd’ (voltage)
Press & hold for 3
seconds to see voltage
reading
Press without holding
for 2nd menu item
Press twice without
holding for 3rd menu
item
Press & hold for temper-
ature in degrees celsius
Press & hold for number
of charge/discharge
cycles
