SAFETY INSTRUCTIONS
This leaflet contains important safety and
operating instructions. Please read these
fully and note all warnings before using
the PAG Camera Power Adaptor.
Please follow all instructions and retain
this leaflet for future reference.
The Camera Power Adaptor is not intended
for any use other than the powering of
video cameras from the PAG Cube Charger
or the PAG V4-iPC charger.
IMPORTANT:
Use only with the PAG Cube or
V4-iPC chargers. Do not attempt to connect
to any other power source.
Do not attempt to disassemble the Camera
Power Adaptor.
There are no user-
serviceable parts inside, and incorrect
reassembly may result in a safety hazard.
Do not use the Camera Power Adaptor if it
has been damaged in any way.
In this
event you should seek advice from your
nearest PAG Dealer, or direct from PAG Ltd.
London, by telep44 (0)20 8543 3131.
U5088 ISS B / MAR 2011
PAG CPA Camera Power Adaptor
Models 9701V & 9701
SPECIFICATION
PAG CPA Camera Power Adaptor
For use with specified PAG V-Mount chargers.
Model No. 9701V
PAG CPA Camera Power Adaptor
For use with specified PAGlok charger.
Model No. 9701
Input Connection:
To be powered only from PAG Cube chargers
(Models 9702 & 9702V) or PAG V4-iPC
charger (Model 9700V).
Output:
16.8V DC. Maximum current 5.5A (90W).
Output Connector:
XLR-4 (F) connector. Pin 1 Negative, Pin 4
Positive.
Overall Dimensions (H x W x D):
130mm x 86mm x 47mm
(5.1" x 3.4" x 1.85" approx.)
Weight:
190g (6.7oz. approx.)
PAG Ltd.
565 Kingston Road
Raynes Park
London SW20 8SA
T +44 (0) 20 8543 3131
F +44 (0) 20 8540 4116
E [email protected]
www.paguk.com
