SO-239 to BNC Flange Mount Adapter Kit
P/N: SO-239-BNC FM Kit
This adapter allows the use of PL-259 terminated
antennas with the AM1. To install, first remove the
BNC to BNC adapter using a 14 mm or 9/16” deep
socket or nutdriver. Mount the SO-239 to BNC
adapter using a #1 Philips screwdriver and the four
#4-40 x 1/4” screws provided.
PL-259 to 3/8-24 Stud Mount Adapter
P/N: 38-24-PL-259
Mount your 3/8-24 stud whip antenna to the
AM1 using this adapter in conjunction with the
SO-239 to BNC Flange Mount kit.
AM1-Bessey 6” Clamp
P/N: AM1-B6A
The AM1-B6A is a high-quality 6” Bessey
bar clamp with an adapter
(shown in silver
for clarity)
allowing it to tightly mate with
the AM1 bracket system retaining the
ability to rotate 90° in either direction.
The combination will tightly grab
surfaces up to 6” thick to stabilize heavy
whip antennas, or give a secure mount
in locations where high winds
are expected.