III.Operations
3.1 How to pair
NOTE: The left and right headsets will automatically connect after power
on in factory. The left headset for pairing will be the master headset
while sub-headset for the right one.
1. Please take your mobile phone close to the device. Suggested distance
is less than 1 meter.
2. Press Multi Function button of the left and right headset for 1 second
and Blue LED on, then the left and right headsets will automatically
connect
3. Turn on the bluetooth application of your mobile phone and click to
search Bluetooth devices near your mobile. Once searched “X12” device
name, please select it to pair. After completely paired, blue LED on and
voice prompt “Pairing successful, Second device connected”.
3.2 Operations
NOTE: The left and right headsets will automatically connect after power
on in factory. The left headset for pairing will be the master headset
while sub-headset for the right one.
Power on/Pairing Press Multi Function button
of the headsets for 1 second
at the same time
Blue LED glitters , and
voice prompt“Pairing
successful,Second
device connected”
Power off
Long Press Multi Function
button either of the
headsets for 5 seconds
Red LED glitters twice,
and voice
prompt”power off”
Play
Click Multi Function button
either of the headset
Pause
Click Multi Function button
either of the headset
Re-dial the last
phone number
made before
Double click Multi Function
button either of the headset
(without music playing mode)
Answer
phone call
Click Multi Function button
either of the headset when
incoming call
Reject
phone calls
Double click Multi Function
button either of the headset
when incoming call
3.3 Cradle charging
1. After putting headsets into the cradle, please click the cradle
of charging button. On the edge of USB LED of cradle will show red once
charging started. Once fully charged, the LED will show blue.
2. The red LED on the edge of will glitters slowly when low battery in
cradle, please charging for cradle timely.
