12
5. Push in and turn both lighting burner control knobs counterclockwise to the # 10 setting / ( ) max. position (see image A1 and A2).
6. Press the electronic ignition button. If the burners do not light, turn the control knobs to the “0”/ “OFF” position and wait five minutes to
allow the gas to clear before attempting to light again or follow match lighting instructions.
7. 4-BURNER MODEL ONLY. To light burners #2 and #3, you must push in and turn control knobs counterclockwise to the
#10 setting / ( ) max. position and hold for 5 seconds to allow the thermocouple time to heat up (see image B).
Operation
Oper
ation
Before lighting
1. Open the lid.
2. ALL control knobs must be set to “0” / “OFF.”
3. Gas supply must be “Closed.”
4. SLOWLY, open the LP cylinder valve counterclockwise. Wait 15 seconds for pressure to stabilize.
ATTENTION: IF YOU RELEASE THE CONTROL KNOB TOO SOON, THE BURNER FLAME FOR BOTH BURNER #2 AND BURNER #3
WILL EXTINGUISH.
BBQ Mode lighting instructions
All burners will function in BBQ Mode. The control knob must be in BBQ Mode (
).
A1
A2
B
Summary of Contents for VIDA Essence Series
Page 2: ...2...