page 5
Paddle Palace A32W PRO Robot
User Manual
Robot Installation and Placement
How to Assemble the Ball Catch Net
The 3 basic components [at left] are Machine Body, Tripod, and Catch Net.
1. Lay the machine body down on its side. Insert the pin of the tripod
into the bottom of the robot body. Lock with the knob.
2. Stand the Robot upright and rotate the safety ring to fixed position.
Tighten the adjustable grip.
3. Insert the Catch Net into the machine.
4. Tighten Ball Catch Net knob.
5. Install Poke Bar inside the Ball Container and tighten knob.
1
2
3
4
5
C
Components
are installed
Installation
completed and
robot is ready
for play.
A
Be sure to open the Castor Lock while moving the Robot.
1
2
3
4
5
6
1. Unlock the buckle that holds the two halves of
the Ball Catch Net together.
2. Open and spread out both sides of the net.
3. Pull out the round bar and insert it into the proper
hole.
4. Put both end sleeves of the Ball Catch Net on the
net supports.
5. Clamp the net support onto both sides of the
table, close to the net.
6. Rubber rings are now buckled to the outsides of
the net support.
NOTE: When practice is finished, unplug the
Robot and fold the Ball Catch Net and fasten
buckles to secure. Always take care when
connecting/disconnecting Ball Catch Net and
moving the Robot.