PROFI H
©V. Padagas ir ko., UAB. All rights reserved.
4. DIRECTIONS FOR USE
4.1 TECHNICAL DATA
Sweeping machine PROFI H
2101
2501
2801
Working width (m)
2.08
2.48
3.05
Sweeping segment diameter (mm)
800
800
800
Hydraulic angling (
o
)
-
±20
±20
Weight (kg)
884
941
980
Drive
Hydraulic
motor
Hydraulic
motor
Hydraulic
motor
Max flow rate (l/min at max 200
bar)
8
0
8
0
8
0
Water pump (V)
12
12
12
Water tank (l)
150/300
150/300
150/300
Dimensions and weight are indicative and may vary. The manufacturer reserves the right to modify
the product design and construction without separate notice.
The attachable sweeping machine is designed for:
Tractors
Front loaders.
4.2 DESCRIPTION OF THE SWEEPING MACHINE
The main components of the sweeping machine are: the frame, the shaft, suspension, supporting
casters and garbage collection bins.
The shaft is rotated by the hydraulic actuator. The torque for the shaft is produced by the hydraulic
motor, which is rotated by connecting the hoses to the tractor's hydraulic system.
The sweeping machine has three cleaning positions, i.e., straight, turned to the right and turned to the
left (Fig. 2). Cleaning positions are set mechanically by turning the rod or hydraulically with the use
of hydraulic cylinder.
In PROFI H model the garbage bin is used for the collection of garbage and other bulk material from
the surface being cleaned.
