User manual
PACOSTAR™ Electronics User manual IR programmable remote control version. 1.1.8
19
19
Picture 22
If the button is read correctly it will show "Successful" and will pass on to the next
button (in this case AV). Press the "AV" on your original remote. Continue this way
until you read all the buttons of the original remote.
4) To exit Learning mode, please press the "Learning mode"
button again.
You can push some of the buttons of the original remote in
front of the
programmer, so it can quit this regime faster.
If the reading of the original remote control button was successful, in the field “Active
button”, a green check mark appears and writes “Successful”.
If the result shows up as in the red rectangle ( the image below),
this means that the
learning didn’t pass successfully, or that currently the code from the original remote
can not be programmed.
