manualshive.com logo in svg

PACOM SmartIP-16PD, User Manual

Share
Download
PACOM SmartIP-16PD User Manual Download Page 30

Part 2 - Getting Started

30

Live Mode

Live Menu

Press the 

Setup

 button while in Live mode to bring up the Live menu on the top of the screen. Press 

Setup

 once 

more to hide the menu. Use the Arrow buttons on the front panel of the NVR or the remote control to select the menu 
options.

1

2

3

4

5 6 7 8

9 0

! @

#

1

Login/Logout

2

Layout

3

Previous Group, 

Next Group

4

Display

5

Freeze

6

Alarm

7

Panic Recording

8

Sequence

9

Select Camera

0

Search Mode

!

Setup

@

Wizard

#

Status Indication

Placing the mouse pointer near the top portion of the screen also displays the Live menu.

1

 

Login/Logout

Log into and out from accounts. If in the logged in 
state, the account ID is shown. If in the logged out 
state, the login icon is shown.

2

 

Layout

Used to change the screen layout to single screen, 
corridor format, 2x2, 3x3, 4x4, 5x5, or 6x6. In order 
to use the corridor format feature, 

Corridor Format

 

(Display Setup - Main monitor - Use Corridor Format) 
must first be enabled.

The 32-channel model does not support the 

corridor format feature.

3

 

Previous/Next Group

Loads the previous/next screen group.

4

 

Display

 

t

OSD

 (On Screen Display): Enables/disables the 

OSD

 

feature.

 

t

Full

: Displays the video in full screen mode.

 

t

Aspect Ratio

: Select whether to enable the original 

aspect ratio of video transmitted from the camera.

5

 

Freeze

Freezes the screen. Select 

Freeze

 again to unfreeze.

6

 

Alarm

Pressing this button while the alarm has been 
activated resets all NVR outputs, including the built-in 
buzzer.

7

 

Panic Recording

Activates/deactivates Panic Recording.

8

 

Sequence

Initiates 

Sequence

 in the same manner as pressing 

the 

SEQUENCE

 button while in Live mode. To exit, 

select 

Sequence

 once more or press the 

SEQUENCE

 

button on the remote control. The 

 icon is displayed 

on the upper right part of the screen while Sequence 
is in progress.

Summary of Contents for SmartIP-16PD

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands