PACOM PPRO-C-VD420-WDR-MZIR, Quick Reference Manual, Page: 6 / 12

6 Quick Guide
2
Insert a SD memory card into the SD memory card
slot with the ‘micro SD’ print facing upward.
micro
SD
• Push the SD memory card until it disengages
from the slot, and then pull it out.
• microSD Logo is a trademark of SD-3C, LLC.
Installation
Check the wall or ceiling to see if it needs to be
reinforced. The camera may fall off if the wall or
ceiling is not strong enough to support its weight.
1
Pull the hook and lift the cover to remove it.
1
2
2
Attach the enclosed desiccant in the SD memory
card slot cover to prevent moisture.
Desiccant
3
Use the screws, anchor provided with the camera
to secure the bottom cover on a wall or a ceiling.
Use the provided guide pattern to check
the distance between the screws.
4
Connect external devices, the network cable, and
the power adapter.
Make sure to shut the side cable hole using
the PT 1/2- inch cable cap for waterproof if
the hole is not used.
5
Adjust the angle. For more information, refer to the
Angle Adjustment
.
6
Adjust the focus and zoom.
English