Part 1 – Introduction
10
Cable
1
3
4
5
2
6
7
8
1
Network Port
2
BNC Video Out (Yellow Cable)
3
Power In (Red Cable)
4
FGND
5
Audio In
6
Audio Out
7
Alarm In
8
Alarm Out
•
Network Port
Connect a network cable with an RJ-45 connector to
this port. If using a PoE switch, you can supply power
to the camera using an ethernet cable. For more
information on PoE switch use, refer to the switch
manufacturer's operation manual. You can configure,
manage, and upgrade this camera and monitor its
images from a remote computer over the network.
For more information on network connection setup,
refer to the
IDIS Discovery operation manual
.
•
Video Out (BNC)
Connect the monitor. Use these ports for previewing
video and not monitoring video.
•
Power In
Connect to the power adapter (12 VDC).
•
FGND (Frame Ground)
Used to ground the device.
•
Audio In
Connect an audio source to this port. (line in)
•
Audio Out
Connect an amplifier to this port (line out). This
device does not feature a built-in audio amplifier
unit and therefore requires the user to purchase a
separate speaker system with a built-in amplifier.
