52
Paco MEC Series
Charging instructions
1.
The settings are made by pressing the MODE/ON-OFF button. After about two seconds, the
charger activates the selected program. The selected program will be restarted the next time
the charger is connected.
2.
To turn off the charger, press and hold the ON/OFF button for 3 seconds.
3.
To restart the charger, press and hold the ON/OFF button for 3 seconds.
Step 1: Check the electrolyte level
Before charging the battery, remove the degassing plugs and check the electrolyte level (not
necessary for gas-tight and maintenance-free batteries). The electrolyte should be 6 mm
(1/4'') above the battery plates. Fill the battery with distilled water to the correct level and
lock the battery again with the degassing plugs.
Step 2 A: Connection outside the vehicle
Connect the
RED
line (battery terminal) of the charger to the plus pole of the battery.
Connect the
BLACK
line (battery terminal) of the charger to the negative pole of the battery.
Summary of Contents for MEC Series
