INSTALLATION GUIDE
FWPR/2 Series LED WALL MOUNT
Instructions and specifi cations are subject to change at any time without notice. Copyright© 2021 PacLights All Rights Reserved
Page 1 of 2
Need help? (800) 988 -6386 Email: [email protected] Website: www.PacLights.com
PL_INST_FWPR/
2_v0
ROTATABLE LIGHTING MODULES
IMPORTANT
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
PacLights fi xtures must be wired in accordance with the National Electrical Code and all applicable local codes. Proper grounding is required for safety.
THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR
WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
WARNINGS:
•
Make certain power is OFF before installing or maintaining fi xture. No user serviceable parts inside.
•
To prevent wiring damage or abrasion, do not expose wiring to edges of sharp objects.
CAUTION:
•
For proper weatherproof function all gaskets must be seated properly and all screws inserted and tightened fi rmly. Apply weatherproof silicone
sealant around the edge of the Back Box and/or Junction Box. This is especially important with an uneven wall surface. Silicone all plugs and
unused conduit entries.
FIG. 1
FIG. 2
FWPR/2 025/040/060
FWPR/2 080/120
All FWPR/
2
fi xtures have LED Modules that can be rotated, from facing the ground to facing away from the wall at an angle. Loosen the Set
Screw(s), located at the side of each Module, then rotate the Module(s) to the desired angle and tighten the Set Screw(s) (Fig. 1). The FWPR/2
fi xtures below show the Module rotations (Fig. 2).
SET SCREW
Connect the ACL and the ACN from the FWPR/2 Fixture to the conduit with the AC power Supply Cable. Follow the Wiring Diagram provided.
AC POWER SUPPLY
FWPR/2 DRIVER
GRA
Y (-)
PURPLE (+)
HOT [BLACK]
NEUTRAL [WHITE]
GROUND [GREEN]
WIRING DIAGRAM
DIM
INPUT
FWPR/
2
FIXTURE
1
LED MODULE
