R
EMOTE
M
ANAGEMENT
C
ONFIGURATION
P
ACKET
L
IGHT
N
ETWORKS
PL-1000RO
3.3
I
NSTALLATION AND
C
ONFIGURATION
M
ANUAL
C
ONFIDENTIAL AND
P
ROPRIETARY
I
NFORMATION
.
A
LL RIGHTS RESERVED
.
P
AGE
157
10
Remote Management Configuration
This chapter provides instructions and for setting up and configuring remote
management.
A remote PL-1000RO can be managed through the OSC management channel.
In this Chapter
Remote Management Configuration Example .......................................... 157
10.1
Remote Management Configuration Example
The following figure illustrates an example of how to configure the remote
management for the point-to-point setup. In this setup, there are two
management systems:
A
and
B
. These systems can manage PL-1000RO nodes A
and B via the OSC channel.
Figure 123: Point-to-Point Remote Management (Example)
10.1.1
Setting Up Point-to-Point Management
To set up point-to-point management:
1.
Make sure that you have local Web access to both PL-1000RO nodes (see
2.
Configure management for PL-1000RO A.
3.
Configure management for PL-1000RO B.
4.
Access the Web application from Management A to PL-1000RO A.
5.
Access the Web application from Management A to PL-1000RO B.
