Page
|
5
GATEWAY TO SMARTER TELECOMS
REMOVING AND INSERTING GSM CARDS
It is essential GSM cards are removed and inserted in the correct manner, or damage
could occur to the card itself, or to the unit’s chassis/back-plane. The following section
will explain and illustrate the correct method.
**GSM cards and
ONLY
GSM cards can be removed while the gateway is
powered up. Removing any other may cause permanent damage to the unit **
1.
Ensure screws
are loosened at
both ends of the
card.
2.
Push in the
black pads and
open the grey
levers outward.
The card should
pop out slightly.
Remove it.
Ensure antenna cables
are disconnected
before removing a GSM
card.
When
inserting a
card, ensure
it is lined up
and running
in the red
guides.
When the
card is
almost in,
push either
end with
your thumbs
then push
both grey
levers
inward to
lock the card
in place.
