7
7
Installating a wall mount
1
Place the included template (first and last page of this Quick Start Guide) at
the desired mounting location. Mark location of mounting points as noted on
template. The distance between the centerlines of the two mounting points
should be 5½ inches (140 mm).
2
Install the included drywall anchors at the marked locations. Screw the drywall
screws into the drywall anchors, leaving at least a 9/64 inch (3.5 mm) gap
between the top of the drywall screw head and wall.
3
Line the keyholes on the bottom of the switch with drywall screws, and mount the
switch onto the drywall screws.
