manualshive.com logo in svg

Packard Bell Viseo243D, User Manual

Share
Download
Packard Bell Viseo243D User Manual Download Page 17

EN-8

INSTALLATION

To install the monitor to your host system, please follow the steps as given 
below: 
Steps
1. 1-1 Connect Video Cable

a. Make sure both the monitor and computer are powered-OFF.
b. Connect the VGA video cable to the computer.

1-2 Connect Digital Cable (Only Dual-input model)

a. Make sure both the monitor and computer are powered-OFF.
b. Connect one end of the 24-pin DVI cable to the back of the monitor 
and connect the other end to the computer’s port.

2. Connect the Audio Cable (Only Audio-Input Model)(Optional)
3. Connect power cord

Connect the power cord to the monitor, then to a properly grounded AC 
outlet.

4. Power-ON Monitor and Computer

Power-ON the monitor first, then power-ON the computer.

This sequence is very important.

5. If the monitor still does not function properly, please refer to the 

troubleshooting section to diagnose the problem.

AUDIO IN

VGA IN

DVI-D IN

DVI

D-Sub

AUDIO IN

VGA IN

DVI-D IN

Summary of Contents for Viseo243D




























Reviews:

No comments

Brands by name

Popular brands

Load more brands