background image

The Packard Bell Non-Contact thermometer is a safe and quick 

way to check temperatures and avoid contact and contamination. 

It measures the infrared energy radiated from the skin (forehead 

area) through the thermometer’s infrared sensor and converts 

that to the equivalent oral temperature value. 

WARNING

Please read these instructions carefully before using this product 

and keep the instructions and the thermometer in a safe place.

• Keep out of reach of children under 12 years.

• Please follow the general safety precautions when using on 

children.

• This thermometer is not waterproof. Never immerse into water 

or other liquids.

• If damaged, do not attempt to repair the product, instead 

please contact customer support.

• Use of this thermometer is not intended as a substitute for 

consultation with your physician.

• This thermometer is not intended for pre-term babies or 

light-for-date babies.

• Do not allow children below 12 years to take their temperatures 

unattended.

• Infrared thermometers contain sensitive electronic components. 

Avoid direct use in an environment with electromagnetic 

interference (such as mobile phones, microwave ovens, etc.) 

which may impact their accuracy.

• Do not use abrasive cleaning agents (see Care and Cleaning).

• Do not store the thermometer in temperature extremes below 

-4 °F (-20 °C) or over 131 °F (55 °C). If the thermometer is stored 

in a location that is cooler or warmer than where it is being 

01

Summary of Contents for PBT200

















Reviews: