Packard Bell LCD Monitor Quick Start Guide (QSG)
Important safety instructions
Please read the following instructions carefully.
1 To clean the LCD monitor screen:
• Turn off the LCD monitor and unplug the power cord.
• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
2 Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely
damage it.
3 Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
4 Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform
servicing of any nature.
5 Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor
outside this range may result in permanent damage.
6 Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:
• Monitor-to-PC signal cable is frayed or damaged.
• Liquid spills onto the LCD monitor or the monitor is exposed to rain.
• The LCD monitor or case is damaged.
Package contents
Attaching the monitor to the base
1 Remove the monitor base from the packaging and place it on a stable and level workspace.
2 Remove the monitor from the packaging.
3 Attach the monitor stand arm to the base.
• Ensure that the base is locked onto the monitor stand arm. (for selected models)
• Secure the base to the monitor stand arm by turning the white screw using the integrated tab or a suitable coin.
(for selected models)
Connecting your monitor to a computer
1 Turn off your computer and unplug your computer’s power cord.
2 Connect the signal cable to the VGA and/or DVI-D (optional) input
socket of the monitor, and the VGA and/or DVI-D (optional) output
socket of the graphics card on the computer. Then tighten the
thumbscrews on the signal cable connector.
3 Connect one end of the adapter to the monitor and the other end
to a properly grounded, AC outlet.
4 Plug the power cords of your computer and your monitor into a
nearby electrical outlet.
Panel controls
No.
Item
Description
1
Power button/
indicator
Turns the monitor on/off. White indicates
power on. Blinking white indicates standby/
power saving mode.
2
<
/
>
button
Press the
<
/
>
button to navigate to the
desired function or to change the settings of
the current function.
3
Menu/Enter
button
Press to view the OSD menu. Press it again to
enter a selection in the OSD menu.
4
Auto/Exit
button
• When the OSD menu is active, press this
button to exit the OSD menu.
• When the OSD menu is inactive, press this
button to activate the Auto Adjustment
function.
5
Empowering
Key
Press this button to open the eColor
Management OSD and access the scenario modes.
English
English
AUDIO IN
DC-IN
DVI-D IN
VGA IN
VGA
Optional: Connect the audio input socket (AUDIO IN) of the
LCD monitor and the line-out port on the computer with the
audio cable.
5
LCD monitor
AC Power
cable
DVI cable
(Optional)
VGA cable
AC Adapter
Quick start guide
(Optional)
Audio Cable
(Optional)
