DVD TV set
Depending on the connectors that are available on your TV set, you may need an
additional cable. Please check your TVs documentation for the best possible
connection.
You may need to use the VIDEO OUT and PROGRESSIVE SCAN buttons to set
the video output mode correctly. Please check the table below.
6
1.Remote control
2.SCART cable
3.User manual & Service Guide
4.Batteries
Open the lid of the battery compartment and install 2 AAA batteries.
Assure correct placement.
1) Before connecting, make sure to turn off the power of all apparatus.
2) After finishing connection, turn on the power again.
The AV cable (optional) is colour coded.
Yellow plug-------- video terminal (yellow)
White plug--------- left audio terminal (white)
Red plug----------- right audio terminal (red)
Please make sure that colours of connectors and plugs correspond.
4.2
Inserting remote control batteries:
4.3
Connections
4.
Setting up your DVD player:
5.1 accessories
4.1 Box contents
OUTPUT PORT
VIDEO
S-VIDEO
Y/Cb/Cr
Y/Pb/Pr
SCART
VIDEO SCANNING MODE
VIDEO OUTPUT MODE
Interleaved
Progressive scanning
CVBS, CVBS+YUV, CVBS+S-VIDEO
CVBS+S-VIDEO
RGB
CVBS+YUV
PSCAN
Interleaved
Interleaved
Interleaved
DVD player and Amplifier or Decoder (DVD DivX 300)
COAXIAL OPTICAL
Decoder
5.1 CHANNEL SURROUND
SOUND OUTPUT
CENTER
SW
R
L FORNT
R
SUR
L
Amplifier
